Forums
[Pathfinder Society] GM Shared Prep :: Forums :: Star Quests :: QP1: Into the Unknown
<< Previous thread | Next thread >>   

Star finder Models

Author Post
Harliquin74
Sun Sep 10 2017, 11:35PM Print View
Registered Member #1471
Joined: Sun Sep 10 2017, 01:46AM
Posts: 2
I made a few models for the Ships in the quest (The Lore Seeker and the Odyssey) they are posted on thingiverse.

https://www.thingiverse.com/thing:2526453
https://www.thingiverse.com/thing:2526441

and the stand

https://www.thingiverse.com/thing:2526449

Still working on the LawBlight and the Endless Threnody.

Another useful thing is asteroids

https://www.thingiverse.com/thing:2528035
Back to top
GinoA
Fri Sep 15 2017, 11:01AM
Registered Member #559
Joined: Sun Sep 21 2014, 10:52PM
Posts: 45
Stumbled upon these earlier today. Heading over to the library to try to print them in a few minutes. Thanks. I'll post pics if the prints come out.
Back to top
GinoA
Fri Sep 15 2017, 02:40PM
Registered Member #559
Joined: Sun Sep 21 2014, 10:52PM
Posts: 45
GinoA wrote ...

Stumbled upon these earlier today. Heading over to the library to try to print them in a few minutes. Thanks. I'll post pics if the prints come out.


Raw print. Needs cleaned up and painted. Planning to print 30mm copies for table use.
Back to top
GinoA
Mon Sep 18 2017, 10:15AM
Registered Member #559
Joined: Sun Sep 21 2014, 10:52PM
Posts: 45
The mentioned 30mm clues are just about table-ready. They just need a clear coat.
Back to top
Brutus_In_SPACE
Sun Oct 01 2017, 10:02PM
Registered Member #1483
Joined: Sun Sep 17 2017, 01:20PM
Posts: 1
Looking at the picture I'm guessing the ships are roughly 3" long. Is that correct?
Back to top
GinoA
Mon Oct 02 2017, 11:58AM
Registered Member #559
Joined: Sun Sep 21 2014, 10:52PM
Posts: 45
As designed, they're just over three inches. I shortened them to 30mm (roughly 1 1/4") for table use.

The unpainted picture is original size and the painted ones are the smaller. The fins on the small Pegasus didn't survive till printing.
Back to top
Harliquin74
Thu Oct 26 2017, 04:51AM
Registered Member #1471
Joined: Sun Sep 10 2017, 01:46AM
Posts: 2
Adjusted the Model for the Pegasus to 1/2 size and thickened the fins.

https://www.thingiverse.com/thing:2599584

Haven't had much time to work on the others yet.
Back to top
maldar
Sun Feb 18 2018, 12:00PM
Registered Member #1060
Joined: Sun Feb 07 2016, 04:00PM
Posts: 13
If I ever really needed a reason for a 3d printer these are it. Thanks.
Back to top
maldar
Sun Feb 18 2018, 12:29PM
Registered Member #1060
Joined: Sun Feb 07 2016, 04:00PM
Posts: 13
Can you make a Half Sized Drake please?
Back to top
GregFerguson
Sun May 12 2019, 09:44PM
Registered Member #1750
Joined: Sat May 11 2019, 09:28PM
Posts: 1
Thanks for the work on these!!
Back to top

Moderators: Pirate Rob, GmPrep, Andi, pfsshardprep

Jump:     Back to top

Powered by e107 Forum System
Chatbox
You must be logged in to post comments on this site - please either log in or if you are not registered click here to signup


TheMaskedFerret
05 Nov : 17:16
Please add sub forums for the new Starfinder Society scenarios

Pirate Rob
22 Sep : 05:26
Added .odg to the allowable filetypes. As a note I only check the chatbox irregularly, email is the best way to contact me to make changes etc.

Terminalmancer
19 Sep : 18:14
Hmmm, if at some point someone with access could add .odg files (LibreOffice Draw) to the list of acceptable attachments, I'd appreciate it. Made a flowchart for PFS1 10-98, but can't upload the source file.

TheBigBlueFrog
17 Sep : 16:46
Thanks, RT.

Redchin_Thunder
08 Sep : 22:07
Also, up in Starfinder - Other

Print on Transparencies

Includes:
5', 10', 15', 20' bursts
15' straight and diagonal cones
30' straight and diagonal cones
20' lines (3x)
30' lines (3x)

Redchin_Thunder
08 Sep : 21:23
Hey putting up a quick and dirty SECRET CHECK ACTIONS sheet that players can fill out for the GM, by action name and associated skill and modifier.

Pirate Rob
21 Aug : 03:54
PF2 Quests Subforum added

Pcrotteau
20 Aug : 11:26
Second Brattykat

SLATE
06 Aug : 21:08
Updated Pathfinder Society (2nd edition) Roleplaying Guild Guide to match Web Version 0.02 (8/5/2019 @ 18:00)

brattykat
03 Aug : 04:22
Need to add the quest forum to PF2


Open Game License

e107.v4 theme by jalist